|
Bits and Barbs
Services
and Information
Electrical & Plumbing diagrams
Independent Testing and Certification
How our Safety Rating System works
Why Hydrogen?
|
July 26, 2010 -- We uncovered a complete HHOG
II Brute cell.
In our move, we have found a HHOG II Brute cell (see
the photos), complete with hose, wire, gas seperator/reservoir and
26 24 gauge plates (5X7 304L SS plates with high efficiency shaped gaskets).
It is brand new and has never been fired up, though the plates have been
pre-conditioned. It is pre-wired for a 12V automotive system, has a 30
amp in-line fuse and requires only 3 wires to hook up (Positive, Negative,
and Signal wire). We are asking $585 for the
complete system, though we will consider any reasonable offer.
It produces 3.25 to 4 LPM at 30 amps. It is available on a First-come-First-served
basis. As soon as it sells, the purchase button will be removed. Please
email me with any questions or concerns you
may have. This is the LAST ONE! Shipping
within the USA is included. Thanks! Steve
July 13, 2010
It has taken longer than expected to get the shop back up and running.
But we are getting there. Even though it isn't fully operational, I have
decided to resume production, due to the large number of orders waiting
to be fulfilled. Hopefully we can get things rolling out the doors again
next week.
The Arid will soon be back in production, as well. The main components
are available, and we should start getting parts in this week. It has
been a long haul, but I think after this, we will be in a much stronger
position.
Thank you all for your patience...Steve
June 30, 2010 - We've Moved.....again....
Well, it has come, again. We've moved. We are still in Massillon, Ohio.
We are wanting to put the girls in a Christian, or Private School, so
we needed to find a cheaper place. Unfortunately, this means I will be
out of pocket for a bit. I should have everything back up this weekend,
though. Keep experimenting! I will get to your emails as soon as I can.
Thanks to everyone for their support! Steve
May 30, 2010 - Happy Memorial Day Weekend
About that "Account Suspended" notice that popped up this weekend?
Sorry about that, it was my fault. I forgot to update my credit card information
with my hosting company, so they temporarily suspended my account! OOPS!
Hope I didn't scare anybody too bad. I haven't gone anywhere.
April 21, 2010 -- Heat Exchanger (Multi HHO Flame)
Here is a very rough drawing of the heat exchanger I promised:

April 16, 2010 -- Quantity Discounts and Shipping Delays
I thought I would list my discount arrangement for everyone to see. You
can see it to the left under "Products". I do offer quantity
discounts, but based on the total amount of the order. In order to receive
the discount, you need to contact me with a list of the products you want
and I will send you a custom invoice with the discount applied.
I have had to update our shipping to 10-14 days(sometimes later). We have
had a lot of quantity orders, lately, and this has delayed shipping for
some of you. I am taking steps to alleviate this, so I ask you to be patient.
Some international orders are taking more than 14 days, so please continue
to be patient. Thank you!
April 13, 2010
I have received a LOT of emails regarding the HHO Heat Exchanger video
on Youtube. Instead of answering all the emails individually, I will post
a photo showing its design sometime this week.
March 8, 2010
Okay, we are having a ridiculous problem getting supplies. We could not
have anticipated this. Many of our suppliers are no longer carrying parts
we need, which has caused us to scramble to find materials elsewhere(even
locally). Fear not, we are making steady headway. This has caused major
delays, though. Especially orders that are from February 15 and later.
I believe we should have these problems resolved by the end of this week,
and should begin shipping soon after that. I apologize for this inconvenience.
Steve.
February 22, 2010
Congratulations to Daniella M. of Ohio for winning the Science Fair
Giveaway!
February 6, 2010 --- 16 inches of snow, last night! Yikes! ---
I will be choosing the HHO Science Fair Giveaway winner this week! I will
announce the winner on February 8, 2010. It has been really fun going
through the essays that I have received. I am pleased with the response
of young people interested in HHO and alternative energy. I hope the Giveaway
will inspire and empower someone in this field.
January 1, 2010
Happy New Year, everyone!
Dec 20, 2009 - Merry Christmas and Happy Holidays!
I will be closing operations for 2 weeks during the Christmas and New
Years holidays. I am not "closing the store" so to speak, however,
don't expect any shipments to go out during the weeks of Dec 21, 2009
through Jan 3, 2010. Don't worry, all orders that were placed before those
times will ship out this coming week according to schedule. I will be
resuming normal operations on Monday Jan 4, 2010.
Dec 09, 2009
Wow...I have been too busy trying to keep my head above water. Business
trips, late hours, blah blah blah. I know, excuses are just excuses. Where
are the results!? Lack of a suitable plate fabricator has put a bit of
a damper on the pressure cell. But I am working on it. If I could only
freeze time...hmmmm. Also, being a native Floridian I am NOT used to the
snow here in Ohio! I didn't think this kind of cold was possible. :-)
Nov 22, 2009
We will be closed from Nov 26 till Nov 29 for the Thanksgiving Holiday
weekend. We will begin normal production and shipping on Monday, Nov 30.
Happy Thanksgiving!
Nov 13, 2009
1) The stainless bubbler system is almost ready for release. I am
still working out some kinks in the blast relief, which I have now integrated
into the removeable lid, and the HHO entrance and exit ports are located
at the bottom of the cylinder, now. This allows for easier chaining. I
will be offering a single bubbler and dual bubbler arrangement. On a different
note, I am soliciting quotes for plate fabrications on the new HHO pressure
cell. More info later.
2) I no longer have a camera (it died, suddenly).
As many of you already know, HHOG Labs is driven by purchases and donations...and
a lot of my own sweat, blood and money. I do not support myself with HHOG
Labs, rather, I am usually picking up the slack with my own hard earned
money. SO... I have decided to ask for help by taking
donations to purchase a new camera. This will allow me to begin posting
videos on Youtube, again.
Any amounts are welcome. I have my eye on this one (JVC
Everio GZ-HD300B) . OR...if anyone feels generous enough to purchase/donate
one (anything) and mail it to me...by all means...I'll send you my mailing
address, along with a generous (50%, not including shipping charges) discount
on your next order. I am not picky. PEACE.
Oct 30, 2009 PM D-DAY
1) We have recently recovered from a vicious
hacker attack to our website. It was perpetrated by SnIP3R H4iL
and lucifer hacker... It started on Oct 22, 2009 and lasted till tonight.
Please bear with us. All orders from Oct 21 till today should ship out
on Monday Nov 2, 2009. I sincerely apologize for the delays. I really
HATE hackers. This attack has cost us thousands. We have spoken with our
hosting company, and they have assured us that far more strenuous security
has been put in place to prevent this from happening again. Fortunately,
we do not collect any personal information from our customers through
this venue, so no one was compromised.
2) All international shipments should now be trackable and insured. It
is more expensive, but with international shipments, it has become necessary.
If you ordered from outside the US, please allow AT LEAST 3 weeks to receive
your shipment AFTER you receive tracking information from us. If you have
waited the correct amount of time, and have not received your order, PLEASE
do not file a dispute with Paypal. Contact me by
email to work it out.
Oct 20, 2009
I forgot to announce that essays for the HHO
Science Fair Giveaway have started rolling in last week. Keep 'em
coming! So far, it looks like it is going to be a difficult decision.
May the best essay win!
Oct 18, 2009
I am having a problem with packages going out of the country, again.
The USPS is either loosing shipments, or they are being delayed at customs.
I assure everyone that your packages are getting shipped, and all customs
paperwork is complete! Please don't file disputes with Paypal unless you
have waited AT LEAST 3 weeks from the time you receive tracking information
from Paypal. NOT 3 weeks after you have ordered! It has gotten so bad,
that I am seriously considering shutting down all international shipments.
You are welcome to comment or question me
on this.
Oct 10, 2009
So many people have been asking me, "What is going on with your upcoming
Elite Series HHO devices?" Well, I have been super busy trying to
balance my new job with HHOG Labs. Filling orders and the transition to
a new job have taken a lot from my research and development time. All
I can do is give you a preview of what I have in the works. I am working
on a stainless steel bubbler system with integrated Atomizer. It isn't
a new development, but with a little HHOG Labs twist, perhaps it could
be the best one out there (especially for pressurized HHO). It is chainable,
so that one could integrate 2 or more into their HHO design. ALSO, I am
in the middle of a new cell that is completely pressurizable. No more
blown gaskets or leaks. It is for high voltage, of a circular design and
contains ceramic fiber surrounds that keep the o-rings intact up to 100
psi. That's all I've got for now! Hope this helps. What am I doing still
typing? I have to get back to work! Feel free to send
over any questions.
|
|